A/V furniture and mounts will be a popular category at this year’s International CES, with new product introductions from many of the top manufacturers. Among those debuting new models will be Bell’O International, Sanus, OmniMount and VMP.
Bell’O is introducing ultra-thin, flexible HDMI cables as well as new A/V furniture for flat-panel TVs.
The new 5000 series of high-speed HDMI cables feature a connector head that is shorter than the connectors of most HDMI cables, Bell’O said, and a flexible design that allows for easy bending. These features are necessary for use behind mounted ultra-thin flat-panel TVs, where space between the TV and the wall is limited, it noted.
They are TruSpeed-tested to deliver a guaranteed 10.2Gbps bandwidth stream, according to the company, and are capable of supporting all enhanced refresh rates, 1080p, 3D and 4k resolution, and 12-bit color. They are also Ethernet enabled.
The cables will ship in February in 4-foot lengths for $29.99 and 8-foot lengths for $34.99.
Bell’O has also added to its Curved Wood collection with the CW52AM flat-panel A/V system. It has tinted tempered safety-glass shelves that can accommodate most flat-panel TVs up to 56 inches plus at least four A/V components.
The open-architecture design provides plenty of ventilation for convection cooling of components while the integrated CMS Cable Management System hides and manages power cords and interconnect cables, resulting in a clean, unobstructed showcase of the room’s A/V equipment, Bell’O said.
It will be available in February at a $299 suggested retail.
Bell’O will also be launching the TPC2133, its newest addition to the Triple Play collection of A/V furniture. This new model offers three configuration options, and can reportedly be assembled without any tools.
The TPC2133 (April, $399) blends dark espresso finished solid wood legs with a brushed-nickel front frame. The Triple Play system can accommodate most flat-panel TVs up to 60 inches or 125 pounds, Bell’O said, and the three black tempered safety glass shelves hold up to four or more audio/video components.
The rear mounting frame and universal swivel mounting system can be removed so that the system can be used as a three-shelf standalone table, or the swivel mounting system can be removed and hung with the included wall mount bracket.
The open architecture design provides plenty of ventilation, and an integrated CMS cable -management system hides and organizes unsightly wires and interconnect cables, according to the company.
Chief will be showing at its suite in the Wynn new SKUs in its Automated Swing Arm line, new Fusion Pull-Out mounts, additions to its Fit-series hinge mounts, as well as its Raxxess line of rack solutions for custom installers.
Chief also recently introduced its VCMU universal projector mount with a solid steel construction. It’s designed for mounting heavy LCD and CRT projectors. Features include a three-step installation process, integrated cable management, and quick connect/disconnect for convenient lamp and filter access on most projectors.
Included with the mount is a universal HBU bracket compatible with most heavy-duty projectors. Multiple installation options are available: flush mount to ceiling; 0.5- inch threaded rods, and a 1.5-inch NPT extension column.
OmniMount is debuting a number of workstations at the show, including the Work15 and Work20 sit-to-stand workstations. These are part of the ActionMount series and are designed to offer flexibility for users in multi-purpose workspaces.
They feature Ergotron Constant Force technology that’s said to provide simple, light-touch adjustments of the keyboard, mouse and monitor. Users can easily move between sitting and standing positions while working, and the full-motion functionality allows the monitor to move up and out of the way for storage, to utilize more desk space, or to share screen information, OmniMount said.
They are available in two configurations: Work15 supports a single monitor up to 15 pounds and Work20 ($429) supports two side-by-side monitors up to 20 pounds. Installation is done via desk clamp or grommet mounting and cable clips control wires.
An optional work surface accessory is available for $49.95.
OmniMount is also launching three full-motion TV mounts at the show that are part of the ActionMount series.
The Play20, Play20X and Play40 feature the Ergotron Constant Force technology for fluid, omnidirectional TV movement. The products are designed for users who get off the couch to interact with their televisions.
TVs can be raised up to 21 inches for gaming or group viewing or lowered 21 inches for fitness or floor seating. The range of pan allows the mount to be viewable from multiple rooms or seating areas, Omni- Mount said, adding that the mount can be used high over a fireplace and then lowered to achieve the proper viewing angle when in use. CF technology reportedly ensures that the force required for movement always remains minimal.
The Play40 fits TVs 60 inches and larger, panel weight not exceeding 40 pounds, and offers up to 21 inches of vertical and horizontal movement. The Play20 and Play20X fit TVs up to 32 inches and 20 pounds and offers up to 15 inches of vertical and horizontal adjustment. The Play20X also comes with a 9-inch arm extension for greater viewing flexibility. Each mount features post installation leveling, tilt and pan, and cable management.
The Play20, Play20X and Play40 will ship in January, offered at suggested retails of $129, $149 and $299, respectively.
Sanus will be introducing the newly redesigned Component 100-series A/V racks. Offered in various sizes — including a 15U model, 27U model , 36U model , and a 44U model — the new 100-series racks feature removable side and back panels for easier access to components.
A 3U panel located at the back of the racks can be placed on top or bottom of the rack’s rear door for customization in wiring. Vented shelves with backstops, and cooling shelves at the top and bottom of each rack, ensure proper airflow for A/V equipment, Sanus said.
The company will be debuting two new Super Slim wall mounts for flat-panel TVs. The Super Slim mount category offers brackets that allow TVs to be mounted as close to the wall as possible, Sanus said.
The new VLF320 and VMF322 mounts allow TV placement incredibly close to the wall while also offering full-motion capabilities. The VLF320 offers 20 inches of extension for TVs 37 inches to 65 inches. The VMF322 offers 22 inches of extension for TVs 26 inches to 47 inches. Both models feature an integrated cable- management system and will be available in early 2012.
The VMA401 on-wall shelf is engineered to hold components up to 15 pounds. It features integrated cable management. and multiple VMA401 units can be combined to provide a one-piece look, Sanus said.
Also at the show will be three new offerings from the company’s Basic series of furniture. All of the new Basic-series furniture can be assembled without tools, Sanus said. New additions to the line include the BFAV546, which includes a modern two-tone walnut finish and dual pullout media drawers for storage; the BFV157, which features a heavy-gauge steel construction and open design to maximize airflow; and the BFV348, designed with a classic look and feel with a distressed black finish. All will be available this month.
Several consumer electronics accessories will also be on display in the Sanus booth, including new Super Slim HDMI cables models ELM4303, ELM4306 and ELM4308. The cables feature an ultra-flexible design, meant for use for connections behind ultra-thin TVs. All three models are Ethernet enabled and can handle 1080p video resolution and beyond for future-generation displays, Sanus said. All of these models are now shipping.
Sanus is also using the show to announce that its Install Kit app, which was previously available only for the iPad, is now also available for iPhone and iPod Touch. The free app is designed as a mount-installation assistant for both the professional installer and the doit- yourselfer.
Video Mount Products has begun shipping its latest midsize flat-panel wall mount, the FP-MFTB Multi-Just with tilt.
The low-profile mount supports flat panels from 27 inches to 42 inches and up to 100 pounds. It has an adjustable tilt range of -5 degrees to +15 degrees, a vertical height adjustment of one inch, list adjustment to +/-3 degrees, a 2.3-inch wall profile and black powder coat finish.
2012年1月11日 星期三
2011年11月29日 星期二
Hella Lighting Featured on New 2012 Volkswagen From Puebla
A major global supplier of automotive lighting and electronics, Hella has lighting production facilities with more than 2,000 employees in Mexico - two in Guadalajara and one in Mexico City.
Shown for the first time at this year's New York International Auto Show, the new Beetle is equipped with Hella headlamps, fog lamps, front side markers, tail lamps, rear reflex reflectors and a center high-mounted LED stop lamp.
In addition, Hella Electronics' products supplied for the new vehicle from the company's San Jose Iturbide manufacturing plant include daylight-running-lamp printed circuit boards, which are part of an energy-saving module.
"Hella's relationship with Volkswagen and the VW Beetle dates back to the first Beetle prototype in 1935 and the start of mass production in 1945," said Ignacio Moreno, CEO of Hella Lighting for the Americas and president of Hella's Corporate Center Mexico. "Our lighting partnership with Volkswagen has continued on a variety of Beetle models over the years."
Volkswagen officially started production of the new Beetle in July at its Puebla plant during ceremonies attended by Mexican President Felipe Calderon and Hubert Waltl, board member for Production and Logistics at Volkswagen Passenger Cars.
Hella began development of its lighting programs for the new 2012 Beetle in 2009. To develop the tail lamps, members of Hella's engineering and product development staff in North America led a core design team located in Lippstadt, Germany. The headlamps were designed by an engineering team in the Czech Republic.
Hella will be providing halogen and HID versions of the headlamp for use in the Americas and Europe. Hella's halogen headlamp uses a standard reflector system using an HB2/H4 bulb for high and low beams. Daytime running-lamp and position-lamp functions are achieved by using one double filament bulb. Production of the halogen version of the headlamps for the new Beetle started earlier this year at a Hella plant in Mexico City.
Hella's HID headlamp consists of a bi-xenon projector using an innovative 25-watt burner - an energy-efficient solution that offers savings of 30W when compared to halogen-bulb solutions. Hella also uses LED technology to generate daytime running-lamp and position-light functions. The LED arrangement gives the headlamp a distinctive appearance.
One of many Hella lamps on the new Beetle is a front side-marker single-function lamp. Located in the front fender of the vehicle near the wheels, the side-marker is a single lamp that uses standard bulb technology.
The rear-reflectors are a safety features that reflect light, enabling other motorists to see a parked vehicle or a vehicle driving without the tail lamps on. It is integrated into the rear bumper. Hella also provides VW with a six-function tail lamp. Stop and tail-lamp functions feature a dual filament 21/5-watt incandescent bulb. The turn signal and backup lights use standard bulbs. The side reflex reflector is incorporated in the lens of the tail lamp. The side marker function (only required for the US market), is achieved by using a single LED. This function assures basic visibility of the vehicle at night.
The 2012 Beetle's center high-mounted stop lamp is comprised of 18 LEDs. It is mounted above the trunk lid in the rear for the vehicle.
Volkswagen's Puebla plant is the largest automotive facility in Mexico and one of the Volkswagen Group's biggest vehicle manufacturing plants. Puebla supplies vehicles for both North and South America, as well as Europe, and has a workforce of more than 15,000.
About Hella: Hella KGaA Hueck & Co. develops and manufactures lighting and electronics components and systems for the automotive industry. Its joint venture companies also produce complete vehicle modules, air-conditioning systems and vehicle electric systems. In addition, Hella has one of the largest automotive aftermarket organizations in the world, with its own sales companies and partners in more than 100 countries.
Hella Group sales were $4.98 billion in fiscal year 2009-2010. Hella is one of the top 50 automotive parts suppliers in the world and one of the 100 largest industrial companies in Germany. Nearly 23,000 people work at 70 locations in more than 30 countries, including more than 3,500 research and development engineers and technicians. Additional information .
From its three lighting facilities in Mexico, Hella supplies a number of the world's major automakers, including BMW, Chrysler, Ford, General Motors, Mercedes, Nissan and Volkswagen.
Shown for the first time at this year's New York International Auto Show, the new Beetle is equipped with Hella headlamps, fog lamps, front side markers, tail lamps, rear reflex reflectors and a center high-mounted LED stop lamp.
In addition, Hella Electronics' products supplied for the new vehicle from the company's San Jose Iturbide manufacturing plant include daylight-running-lamp printed circuit boards, which are part of an energy-saving module.
"Hella's relationship with Volkswagen and the VW Beetle dates back to the first Beetle prototype in 1935 and the start of mass production in 1945," said Ignacio Moreno, CEO of Hella Lighting for the Americas and president of Hella's Corporate Center Mexico. "Our lighting partnership with Volkswagen has continued on a variety of Beetle models over the years."
Volkswagen officially started production of the new Beetle in July at its Puebla plant during ceremonies attended by Mexican President Felipe Calderon and Hubert Waltl, board member for Production and Logistics at Volkswagen Passenger Cars.
Hella began development of its lighting programs for the new 2012 Beetle in 2009. To develop the tail lamps, members of Hella's engineering and product development staff in North America led a core design team located in Lippstadt, Germany. The headlamps were designed by an engineering team in the Czech Republic.
Hella will be providing halogen and HID versions of the headlamp for use in the Americas and Europe. Hella's halogen headlamp uses a standard reflector system using an HB2/H4 bulb for high and low beams. Daytime running-lamp and position-lamp functions are achieved by using one double filament bulb. Production of the halogen version of the headlamps for the new Beetle started earlier this year at a Hella plant in Mexico City.
Hella's HID headlamp consists of a bi-xenon projector using an innovative 25-watt burner - an energy-efficient solution that offers savings of 30W when compared to halogen-bulb solutions. Hella also uses LED technology to generate daytime running-lamp and position-light functions. The LED arrangement gives the headlamp a distinctive appearance.
One of many Hella lamps on the new Beetle is a front side-marker single-function lamp. Located in the front fender of the vehicle near the wheels, the side-marker is a single lamp that uses standard bulb technology.
The rear-reflectors are a safety features that reflect light, enabling other motorists to see a parked vehicle or a vehicle driving without the tail lamps on. It is integrated into the rear bumper. Hella also provides VW with a six-function tail lamp. Stop and tail-lamp functions feature a dual filament 21/5-watt incandescent bulb. The turn signal and backup lights use standard bulbs. The side reflex reflector is incorporated in the lens of the tail lamp. The side marker function (only required for the US market), is achieved by using a single LED. This function assures basic visibility of the vehicle at night.
The 2012 Beetle's center high-mounted stop lamp is comprised of 18 LEDs. It is mounted above the trunk lid in the rear for the vehicle.
Volkswagen's Puebla plant is the largest automotive facility in Mexico and one of the Volkswagen Group's biggest vehicle manufacturing plants. Puebla supplies vehicles for both North and South America, as well as Europe, and has a workforce of more than 15,000.
About Hella: Hella KGaA Hueck & Co. develops and manufactures lighting and electronics components and systems for the automotive industry. Its joint venture companies also produce complete vehicle modules, air-conditioning systems and vehicle electric systems. In addition, Hella has one of the largest automotive aftermarket organizations in the world, with its own sales companies and partners in more than 100 countries.
Hella Group sales were $4.98 billion in fiscal year 2009-2010. Hella is one of the top 50 automotive parts suppliers in the world and one of the 100 largest industrial companies in Germany. Nearly 23,000 people work at 70 locations in more than 30 countries, including more than 3,500 research and development engineers and technicians. Additional information .
From its three lighting facilities in Mexico, Hella supplies a number of the world's major automakers, including BMW, Chrysler, Ford, General Motors, Mercedes, Nissan and Volkswagen.
2011年11月24日 星期四
All-New 2013 GS Illustrates Fresh and Exciting Brand Identity
Lexus raised anticipations when the all-new GS debuted at the 2011 Pebble Beach Concours d’Elegance. The new 2013 GS combines bold, dynamic styling, precise handling, innovative technology, and a spacious interior.
In addition to the GS 350 that will be at dealerships early next year, Lexus completes the line-up with the GS 450h hybrid which goes on sale in spring 2012.
The new GS conveys an enhanced sense of confidence to the driver, with a redesigned chassis and a wide, strong stance that inspires and rewards driver participation with crisp and precise handling. Engineers developed a more spacious interior environment while leaving exterior dimensions virtually unchanged to ensure excellent maneuverability. Richly endowed with world-class features and premium details, the new GS is supported by advanced, performance-enhancing technology that makes it more than just a luxury car. The 2013 Lexus GS 350 is available in rear-wheel driveor all-wheel drive configurations, and can be equipped with the available Premium, Luxury or F SPORT packages for greater personalization.
The GS 450h was the first hybrid-powered luxury sport sedan to enter the market when it was originally introduced for the 2007 model year. Today, it is part of Lexus’ five-vehicle hybrid line-up, more than any other luxury brand.The new GS powertrains have been enhanced for 2013 to provide better fuel economy and more responsive performance. The GS 350 is powered by an advanced 3.5-liter V6, four cams, and four valves per cylinder engine with dual Variable Valve Timing with intelligence. At 306 horsepower, it is one of the most powerful base engines in the segment, as well as the only one with both port and direct injection. It propels the GS 350 from 0-60 mph in 5.7 seconds and at the same time, boosts its fuel economy to projected EPA-estimated ratings of 19 mpg city, 28 mpg highway and 23 mpg combined.
Acceleration from 30 to 50 mph can take just 3.0 seconds, and improved intake and exhaust sound characteristics via an intake sound generator and optimized muffler chamber complement the bolder, more energetic personality of the new GS. The six-speed sequential shift automatic transmission comes with paddle shifters and sport driving functions for enhanced driving pleasure. An optional electronically controlled all-wheel-drive system can vary front-to-rear torque balance from 50/50 to as much as 30/70, depending on driving conditions, for exceptional control.
The 2013 GS 450h incorporates improvements to its hybrid powertrain and is equipped with a second generation Lexus Hybrid Drive system.
With a total system power output of 338 horsepower, the GS 450h will accelerate effortlessly from 0-60 mph in 5.6 seconds. Conversely, fuel consumption is expected to be improved by more than 35 percent versus the previous version with projected EPA-estimated ratings of 29 mpg city, 34 mpg highway and 31 mpg combined. The GS 450h is expected to be certified as a Super-Ultra Low Emissions Vehicle which has lower emissions than clean diesels. For enhanced driving dynamics, the new GS hybrid also features a Drive Mode selector with Normal, Eco, Sport S, Sport S+ and EV modes.
As with all Lexus hybrid vehicles, the new GS 450h is a full hybrid capable of operating in gas-only or electric-only modes, as well as a combination of both. Its Lexus Hybrid Drive system features an ultra-smooth running, next generation D-4S direct and port fuel injection system with an Atkinson cycle 3.5-liter V6 engine mated to a compact, high-output, water-cooled permanent magnet electric motor powered by a high performance nickel-metal hydride battery pack. The two powerplants drive the rear wheels both independently and in tandem, as needed.
Improved fuel consumption is achieved through a high compression ratio of 13:1, a new mid-port intake tumble generator and the adoption of a Lexus four-stroke, direct injection technology, D-4S.
With one injector installed in the combustion chamber and a second mounted in the intake port, D-4S combines the strengths of both direct and port injection, realizing optimum engine efficiency throughout the power band and improving torque across the rev range, while minimizing fuel consumption and emissions.
The D-4S system features new slit-type injector nozzles with a modified port shape, a higher fuel pressure for more efficient combustion, and idle port injection for improved NVH characteristics.
The cooling performance of the hybrid system’s Power Control Unit helps reduce fuel consumption and has been improved through the adoption of dual cooling paths and a single-piece, integrated DC/DC converter.
In addition to the GS 350 that will be at dealerships early next year, Lexus completes the line-up with the GS 450h hybrid which goes on sale in spring 2012.
The new GS conveys an enhanced sense of confidence to the driver, with a redesigned chassis and a wide, strong stance that inspires and rewards driver participation with crisp and precise handling. Engineers developed a more spacious interior environment while leaving exterior dimensions virtually unchanged to ensure excellent maneuverability. Richly endowed with world-class features and premium details, the new GS is supported by advanced, performance-enhancing technology that makes it more than just a luxury car. The 2013 Lexus GS 350 is available in rear-wheel driveor all-wheel drive configurations, and can be equipped with the available Premium, Luxury or F SPORT packages for greater personalization.
The GS 450h was the first hybrid-powered luxury sport sedan to enter the market when it was originally introduced for the 2007 model year. Today, it is part of Lexus’ five-vehicle hybrid line-up, more than any other luxury brand.The new GS powertrains have been enhanced for 2013 to provide better fuel economy and more responsive performance. The GS 350 is powered by an advanced 3.5-liter V6, four cams, and four valves per cylinder engine with dual Variable Valve Timing with intelligence. At 306 horsepower, it is one of the most powerful base engines in the segment, as well as the only one with both port and direct injection. It propels the GS 350 from 0-60 mph in 5.7 seconds and at the same time, boosts its fuel economy to projected EPA-estimated ratings of 19 mpg city, 28 mpg highway and 23 mpg combined.
Acceleration from 30 to 50 mph can take just 3.0 seconds, and improved intake and exhaust sound characteristics via an intake sound generator and optimized muffler chamber complement the bolder, more energetic personality of the new GS. The six-speed sequential shift automatic transmission comes with paddle shifters and sport driving functions for enhanced driving pleasure. An optional electronically controlled all-wheel-drive system can vary front-to-rear torque balance from 50/50 to as much as 30/70, depending on driving conditions, for exceptional control.
The 2013 GS 450h incorporates improvements to its hybrid powertrain and is equipped with a second generation Lexus Hybrid Drive system.
With a total system power output of 338 horsepower, the GS 450h will accelerate effortlessly from 0-60 mph in 5.6 seconds. Conversely, fuel consumption is expected to be improved by more than 35 percent versus the previous version with projected EPA-estimated ratings of 29 mpg city, 34 mpg highway and 31 mpg combined. The GS 450h is expected to be certified as a Super-Ultra Low Emissions Vehicle which has lower emissions than clean diesels. For enhanced driving dynamics, the new GS hybrid also features a Drive Mode selector with Normal, Eco, Sport S, Sport S+ and EV modes.
As with all Lexus hybrid vehicles, the new GS 450h is a full hybrid capable of operating in gas-only or electric-only modes, as well as a combination of both. Its Lexus Hybrid Drive system features an ultra-smooth running, next generation D-4S direct and port fuel injection system with an Atkinson cycle 3.5-liter V6 engine mated to a compact, high-output, water-cooled permanent magnet electric motor powered by a high performance nickel-metal hydride battery pack. The two powerplants drive the rear wheels both independently and in tandem, as needed.
Improved fuel consumption is achieved through a high compression ratio of 13:1, a new mid-port intake tumble generator and the adoption of a Lexus four-stroke, direct injection technology, D-4S.
With one injector installed in the combustion chamber and a second mounted in the intake port, D-4S combines the strengths of both direct and port injection, realizing optimum engine efficiency throughout the power band and improving torque across the rev range, while minimizing fuel consumption and emissions.
The D-4S system features new slit-type injector nozzles with a modified port shape, a higher fuel pressure for more efficient combustion, and idle port injection for improved NVH characteristics.
The cooling performance of the hybrid system’s Power Control Unit helps reduce fuel consumption and has been improved through the adoption of dual cooling paths and a single-piece, integrated DC/DC converter.
2011年9月19日 星期一
Sim2 Presents 15 Products Celebrating 15 Years
Sim2 brought its executive team from Italy to the recent CEDIA Expo take the wraps off of a range of high-performance
projectors introduced this year for the custom-installation market, highlighted by a new one-chip DLP 3D solution.
In total, the company show cased 15 products introduced in 2011 to symbolize its 15th anniversary celebration this year,
which coincides with the 150th anniversary of modern Italy. Models are distributed between the Crystal, Nero, Lumis 3D,
Mico and Cinema series.
“Our target was to provide a range of products that can fit 95 percent of our customers’ requests from the performance
point of view and the price point of view,” said Maurizio Cini, said Sim2 Multimedia president.
Highlighting the assortment was Sim2’s new Nero single-chip DLP projector platform, including 3D capability that “sets
a new reference standard,” according to Alberto Fabiano, Sim2 USA executive VP.
The 3D version of the Nero platform uses much of the same high-quality optics and electronics as its ultra- high
performing three-chip Lumis 3D Solo cousin but in a lower-priced compact configuration.
The Nero offers installers a choice of three lenses (T1, T2 and T3) providing a total throw ratio of 1.37- 3.9:1 for
installation flexibility.
The lenses are part of Sim2’s Unified Throw Ratio concept, which makes specifying and upgrading within the Sim2 line
very easy, the company said.
To aid calibration, Sim2’s Live Colors Calibration 2.0 software allows adjustment of primary, secondary, and white-
point color coordinates in both 2D and 3D, enabling experts to accurately calibrate the final image on-screen via a
user-friendly PC-based interface.
Nero is described as the platform for a line of premium single-chip FullHD 1080p/120Hz DLP projectors that includes the
Nero 3D-1, Nero 3D-2, Nero 3DHighBrightness and Nero 235. The assortment will offer consumers four different feature
sets, depending on the model, including 3D, high brightness, high contrast and 2.35:1 aspect ratio.
Suggested retails for models in the series start at $19,990.
A highly styled projector cabinet ships with all the models in an appropriately named Nero Black color.
Fabiano said that unlike some competitors who have elected to drive prices and performance lower to attract a broader
market segment, Sim2 will stick to its guns by making products that appeal to affluent customers “who don’t really
care how much the product costs.”
For that reason, Sim2 is looking to carefully expand its dealer base by adding only those accounts that “are able to
support the brand in the appropriate way.”
“While the market continually downgrades, often building to a price to survive in this difficult economy — we stay
true to our high-performance, reference-standard roots,” Fabiano said. “Our in-house R&D team continually boasts
industry firsts, and CEDIA 2011 will certainly not disappoint.”
Among other products on display were the Lumis 3D Solo, which is a single three-chip DLP projector configuration in
contrast to the more costly doublestacked Lumis 3D Duo introduced last year. The Solo is based on active-shutter 3D
glasses technology from Xpand with Triple Flash 3D technology implemented by Sim2 and Texas Instruments.
The company also showed its Mico LED-lamp-powered projector line (with prices starting at $23,000 suggested retail)
including the new 150 model. The system is said to provide longer lamp life, a large color range, lower power
consumption and instant power-on and -off operation.
projectors introduced this year for the custom-installation market, highlighted by a new one-chip DLP 3D solution.
In total, the company show cased 15 products introduced in 2011 to symbolize its 15th anniversary celebration this year,
which coincides with the 150th anniversary of modern Italy. Models are distributed between the Crystal, Nero, Lumis 3D,
Mico and Cinema series.
“Our target was to provide a range of products that can fit 95 percent of our customers’ requests from the performance
point of view and the price point of view,” said Maurizio Cini, said Sim2 Multimedia president.
Highlighting the assortment was Sim2’s new Nero single-chip DLP projector platform, including 3D capability that “sets
a new reference standard,” according to Alberto Fabiano, Sim2 USA executive VP.
The 3D version of the Nero platform uses much of the same high-quality optics and electronics as its ultra- high
performing three-chip Lumis 3D Solo cousin but in a lower-priced compact configuration.
The Nero offers installers a choice of three lenses (T1, T2 and T3) providing a total throw ratio of 1.37- 3.9:1 for
installation flexibility.
The lenses are part of Sim2’s Unified Throw Ratio concept, which makes specifying and upgrading within the Sim2 line
very easy, the company said.
To aid calibration, Sim2’s Live Colors Calibration 2.0 software allows adjustment of primary, secondary, and white-
point color coordinates in both 2D and 3D, enabling experts to accurately calibrate the final image on-screen via a
user-friendly PC-based interface.
Nero is described as the platform for a line of premium single-chip FullHD 1080p/120Hz DLP projectors that includes the
Nero 3D-1, Nero 3D-2, Nero 3DHighBrightness and Nero 235. The assortment will offer consumers four different feature
sets, depending on the model, including 3D, high brightness, high contrast and 2.35:1 aspect ratio.
Suggested retails for models in the series start at $19,990.
A highly styled projector cabinet ships with all the models in an appropriately named Nero Black color.
Fabiano said that unlike some competitors who have elected to drive prices and performance lower to attract a broader
market segment, Sim2 will stick to its guns by making products that appeal to affluent customers “who don’t really
care how much the product costs.”
For that reason, Sim2 is looking to carefully expand its dealer base by adding only those accounts that “are able to
support the brand in the appropriate way.”
“While the market continually downgrades, often building to a price to survive in this difficult economy — we stay
true to our high-performance, reference-standard roots,” Fabiano said. “Our in-house R&D team continually boasts
industry firsts, and CEDIA 2011 will certainly not disappoint.”
Among other products on display were the Lumis 3D Solo, which is a single three-chip DLP projector configuration in
contrast to the more costly doublestacked Lumis 3D Duo introduced last year. The Solo is based on active-shutter 3D
glasses technology from Xpand with Triple Flash 3D technology implemented by Sim2 and Texas Instruments.
The company also showed its Mico LED-lamp-powered projector line (with prices starting at $23,000 suggested retail)
including the new 150 model. The system is said to provide longer lamp life, a large color range, lower power
consumption and instant power-on and -off operation.
2011年9月5日 星期一
Review: NEC M260GX projector
NEW DELHI: Projectors are evolving from being just business tools to much more. NEC's M260GX projector is one such projector that is fantastic for boardrooms, but also works great for entertainment purposes. Weighing 2.9kg, the M260GX looks very elegant in white.
The matte finish on the body keeps it free from fingerprints , but it does tend to get dirty very quickly. One noticeable thing about the projector design is that it has a sliding cover for the lens - this has pros and cons. The sliding cover is simpler to use and keeps the lens well protected, but it can become a problem to operate if you choose to mount the projector on the roof.
For table top use, the three legs underneath can be rotated individually - helpful to balance it on an uneven surface. The zoom and focus ring are accessible from the top of the projector. The power button on top lights up to indicate status - orange (standby) and blue(in use).
There are also indication LEDs for status and lamp overheat placed around the buttons for source selection and eco mode. At the back, all the connectivity ports are neatly placed with sufficient distance to connect multiple devices simultaneously. You get HDMI, 2 x D-sub (VGA) inputs, Dsub out, S-video and composite in, audio in/out, Ethernet and a standard size USB port.
Setting up the projector takes barely a few minutes. It can be kept on a desk or wall mounted -settings are available in the menu to adjust the view for the same. Once connected to power, the projector takes just about 30 seconds to display the first images.
It does however, take over 2 minutes to reach full brightness level and display proper colors. The built in auto keystone compensates for changes in angle of the projector. It works well and adjusts the image in about a second for a rectangular screen. Shutting down takes about 15 seconds with another 15 seconds to cool down completely.
Purely looking at specifications, the projector has an XGA resolution (1024x768 pixels) with 2600 ANSI Lumens brightness, 2000:1 contrast ratio and a rated lamp life of 6000 hours. While viewing presentations and other office documents, the projector displayed sharp blacks over white, which were easy to read.
It even offers the option to adjust the settings as per your wall color to get the best output. While viewing videos, the projector delivered vivid colors and superb clarity. HD videos looked spectacular, while gaming was great with no ghosting or lag - clearly indicating that it is great for home use as well.
The USB port on the back from a USB drive without connecting to a PC if required. And the included 10W speaker is good enough to use in a small room. At the price, the M260 turns out to be a great option if you are looking for something to use in a small home-office.
For about the same price, the Benq MW512 can also be considered. The technology is different - it is a DLP projector and offers better resolution, contrast and is also 3D ready. However, it lacks network connectivity and comes with a smaller 2W speaker.
The matte finish on the body keeps it free from fingerprints , but it does tend to get dirty very quickly. One noticeable thing about the projector design is that it has a sliding cover for the lens - this has pros and cons. The sliding cover is simpler to use and keeps the lens well protected, but it can become a problem to operate if you choose to mount the projector on the roof.
For table top use, the three legs underneath can be rotated individually - helpful to balance it on an uneven surface. The zoom and focus ring are accessible from the top of the projector. The power button on top lights up to indicate status - orange (standby) and blue(in use).
There are also indication LEDs for status and lamp overheat placed around the buttons for source selection and eco mode. At the back, all the connectivity ports are neatly placed with sufficient distance to connect multiple devices simultaneously. You get HDMI, 2 x D-sub (VGA) inputs, Dsub out, S-video and composite in, audio in/out, Ethernet and a standard size USB port.
Setting up the projector takes barely a few minutes. It can be kept on a desk or wall mounted -settings are available in the menu to adjust the view for the same. Once connected to power, the projector takes just about 30 seconds to display the first images.
It does however, take over 2 minutes to reach full brightness level and display proper colors. The built in auto keystone compensates for changes in angle of the projector. It works well and adjusts the image in about a second for a rectangular screen. Shutting down takes about 15 seconds with another 15 seconds to cool down completely.
Purely looking at specifications, the projector has an XGA resolution (1024x768 pixels) with 2600 ANSI Lumens brightness, 2000:1 contrast ratio and a rated lamp life of 6000 hours. While viewing presentations and other office documents, the projector displayed sharp blacks over white, which were easy to read.
It even offers the option to adjust the settings as per your wall color to get the best output. While viewing videos, the projector delivered vivid colors and superb clarity. HD videos looked spectacular, while gaming was great with no ghosting or lag - clearly indicating that it is great for home use as well.
The USB port on the back from a USB drive without connecting to a PC if required. And the included 10W speaker is good enough to use in a small room. At the price, the M260 turns out to be a great option if you are looking for something to use in a small home-office.
For about the same price, the Benq MW512 can also be considered. The technology is different - it is a DLP projector and offers better resolution, contrast and is also 3D ready. However, it lacks network connectivity and comes with a smaller 2W speaker.
訂閱：
文章 (Atom)